EDAPLAN 516 is an anionic dispersing agent with low foam tendencies suitable for many aqueous systems. It is recommended for most common pigments and fillers. EDAPLAN 516 is compatible with many emulsion polymers.
It can be used over a wide pH range and prevents the formation of settlements and stabilizes the system. EDAPLAN 516 is particularly suitable for dispersion of titanium dioxide, sheet silicates and fillers to achieve a constantly low paste viscosity.
METOLAT 514 is an anionic dispersing agent with low foam tendencies suitable for many aqueous systems. It is recommended for most common pigments and fillers. METOLAT 514 is compatible with many emulsion polymers. It can be used over a wide pH range. METOLAT 514 reduces the mill base viscosity and provides higher pigment volume concentrations. It prevents the formation of settlements and stabilizes the system.
|Improvement of flow and leveling|
|Reduction of misting|
|Reduction of viscosity|
|Stabilization of pigments and fillers|
Recommended Highly Recommended
Carrier of Defoamer: M = Mineral Oil, POA = Polyalkylene Technology, W = Water
Formulation Type: 3D = 3-Dimensional (3D) Siloxane, FG = Food Grade Glycerides, FS = Fluoro Silicone, HS = Hydrophobic Silica, OMS = Organo-Modified Siloxane, PG = Polyoxyalkylene Glycol, POA = Polyoxyalkylene Technology, SI = Silicone, VO = Vegetable Oil, WA = Special Wax
Food contact: o = Applicable
Concentrate or Emulsion: C = Concentrate, E = Emulsion
Solvent: AH = Aliphatic Hydrocarbon, BA = Butyl Acetate, BG = Butyl glycol, BGW = Butyl glycol - Water, DPM = Dipropylenglykolmethylether, EA = Ethyl Acetate, ET = Ethanol, HC = Hydrocarbon, LO = Linseed oil, MX = Mixture, MP = 1-Methoxy-2-propanol, O = Oligotriacrylate, PR = 2-Propanol (IPA), SN = Solventnaphtha, W = Water
Wax type: A = Amide, BP = Biopolymer, polyethylene, BW = Bees Wax, C = Carnauba, CP = Copolymer, E = Erucamide, EBS = Ethylen bis stearamide, FB = Functional Blend, FT = Fischer-Tropsch, HC = Hydrocarbon, HM = Hydrolysed Montan, ME = Montanester, MM = Modified montan, NW = Natural Wax, OP = Oxidized polyethylene, PC = Paraffin Combination, PE = Polyethylene, PEP = PE modified with PTFE, PFT = Polar Fischer-Tropsch, PM = Polymers, PO = Polyolefin, POP = Polyolefin with PTFE, PP = Polypropylene, PPO = Polar Polyolefin, PTFE = Polytetrafluorethylene, SW = Synthetic Wax, ZS = Zinc Stearate